Concrete Form Setter Job Description for Resume

Updated on: February 18, 2019

The main work of a concrete form setter is to work alongside construction worker by erecting and setting forms for concrete structures.

The work is tough because it requires a lot of physical labor. And you can only perform it well if you are physically strong.

Usually, a high school diploma or a GED equivalent is sufficient to work as a concrete form setting. However, you will need to be skilled in areas such as reading and interpreting blueprints. Previous experience in a similar capacity will help you climb the ladder to the top of the candidate pool.

As a concrete form setter, you will be performing many duties, for example, setting up forms, reinforcement through wire meshes, and concrete smoothing tasks.

Also, your work will involve checking to see if forms are properly placed. Experience and skills in using tools and equipment specific to the trade are also required.

See also: Concrete Worker Resume

Some of the main duties of a concrete form setter are listed here:

Concrete Form Setter Job Description for Resume

• Check blueprints and building designs in order to determine the right places to place concrete in.
• Confer with foremen and laborers to decide timelines.
• Build and lay out concrete forms according to specified instructions.
• Saw materials in accordance with blueprint dimensions.
• Use equipment and tools such as hand and power saws, and hammers to perform setting work.
• Insert spreaders, and tie rods between opposite faces of forms.
• Anchor and brace forms to fixed objects by using nails, and steel cables.
• Check all installed forms in order to ensure that they are properly constructed.
• Set forms to desired pitches and depth, as well as align them properly.
• Mold expansion joints and edges using tools such as edging tools, jointers, and straightedges.
• Monitor the effects of wind, heat, and cold on concrete forms.
• Signal truck containing concrete in order to help them pour concrete in a proper manner.
• Produce rough concrete surfaces, and use brooms and other items to smooth them out.
• Direct the casting of concrete.
• Supervise laborers as they set concrete forms into place.
• Mix appropriate quantities of sand, cement, and water to produce concrete and grout.
• Cut out damaged areas, and fix them properly.
• Clean chipped areas, and grind high spots.
• Place roofing paper on foundation surfaces.
• Build wooden molds, and clamp them together.
• Sprinkle colored marble or chips in order to provide the prescribed finish.

Leave a Reply

Your email address will not be published. Required fields are marked *